Lazor Beam

“Future warfare! Lazor beams burn through any target, causing moderate damage to all enemies in its path.”
Mark 1 Mark 2 Mark 3


  • The Lazor Beam is a Prototype Defense that is built in the Weapon Lab.
  • Like all Prototype Defenses, it will only last 12 days after it is placed on your base.
  • The Lazor’s beam will sweep through enemy troops in the direction it fires. The sweep line has a set length and can even go outside the standard firing range of the Lazor, but it will stop early at a map boundary.


  • This defense is best for defeating Zookas, so place it away from other defenses that are best at dealing with Zookassuch as Rocket Launchers.
  • A Lazor Beam may help some in defending from a Warrior attack, but generally, a Damage Amplifier or Shock Blaster will help more.
  • If you are frequently attacked by the Smokey Hooka attack strategy, make sure the Lazor Beam can cover all sides of the Headquarters.
    • Try to place the Lazor Beam where the Heavies will be between it and the Zookas in a Smokey Hooka attack. This way, the attacker will have to use an extra Shock Bomb to disable the Lazor Beam because it is the only defense that Heavies cannot protect Zookas from.


  • Due to this defense’s low damage per hit, large troops such as Tanks can take it out easily.
  • Smaller troops are more vulnerable, but this defense only excels at taking out Zookas due to its ability to hit them even if they are behind larger troops and the fact that Zookas have very low health. One sweep will generally take out many of them.
  • This is the single best turret for defeating a Hooka attack, so unless you can keep it permanently stunned until yourZookas can destroy it or destroy it immediately with Barrages and Artillery, do not use Hooka against it.
  • Be careful when placing Smoke Screens while using strategies that involve Zookas. If even one steps out of the smoke while walking, the Lazor will quickly target it and fire, which will likely kill many of your Zookas.
  • As the Lazor Beam sweeps, it can hit any troops under a Smoke Screen that are in its path.


  • At Mark I, the Lazor Beam is a circular stand with a pole on which a projection dish is present. There are 2 Power Rods propped up against it, and another one inside it. The interior power rod has 2 grey tubes connected to it, which are in turn connected to a small grey box.
  • At Mark II, the circular stand gains several structural rods and a ring. The Power Rods are replaced by a black box. The original box is now on the ground. The base gains a slight color change.
  • At Mark III, the framework gains heavy metal plating with yellow outlines. It gains a small yellow door with a ring on it. The black box propped up at the side of the Lazor Beam is removed.


  • Oddly, the Mark I Lazor Beam, which appears to have Power Rods leaning against it, does not require any Power Rods to construct.
Building Size Range Attack Speed Damage Type
3×3  18 4 Seconds Splash


Mark Number Health Damage Per Second Damage Per Shot Build Cost Build Time Weapon Lab
level Required
Fuses Gears Rods Capacitors
1 15,000 32 128 0 0 3 3 1h 1
2 20,000 48 192 6 3 3 0 4h 2
3 25,000 64 256 3 6 0 9 12h 4

Check Also

Prototype Modules

Prototype Modules are used to create Prototype Defenses in the Weapon Lab. They can be ...

Damage Amplifier

“Amplifies the damage output of all nearby defenses using a high voltage hyperbolic gauss overdrive ...

One comment

  1. It says “lasts 12 days”. It should read lasts 7 days

Leave a Reply

Your email address will not be published. Required fields are marked *